In short, no. Our Fireray detectors are not designed to be painted, as there is a risk that paint could adversely affect the plastics and electronics over time. However, we are aware that our product needs to work alongside your buildings so, as an alternative,...
5m Minimum to 120m Maximum. ...
Any FFE Beam can be connected to a Wireless interface. ...
Areas which are open to the outside world, have lots of air born contamination or large temperature swings should be avoided when using Beams. Strong sunlight can cause false alarms for older Beams in the FFE range. ...
If you cannot archive the guidelines for the Reflective type, the End to End should be used. ...
You need the 1m diameter Line of Sight and ideally not have any reflective surfaces along the Beams run. Glass and shiny surfaces along the Beams path should be avoided. If you can’t achieve this, the End to End type can be used. ...
You must have the correct ‘line of Sight’ to align a Beam. 1m diameter for the Reflective types 600mm diameter for the End to End (this can be less under certain circumstances). The Risk Area should ideally be enclosed from the outside world, have no...
Click below to download the Fireray Detector Flow Chart....
All datasheets can be found at ffeuk.com go to the Products, then the relevant Fireray tab and select beam type, then go to resources and then datasheets. ...
Click below to download the Fireray Part Numbers and Approvals document....
