19 Sep How to align a Beam Detector
After installing a Beam Detector, you now need to align it. All our Beams are aligned slightly differently yet are all so easy to do as you’ll see in this course. ...
13 Sep How to install a Spark Detector
As the Talentum® Spark is rear facing, installing them is different to the rest of our Talentum® Range. These units specialise in detecting in spark in dark and enclosed areas where no visible light is present. ...
06 Sep How to install a Flame Detector
Installing your Flame Detector couldn’t be made easier with this module. There are three types of Flame Detector, IR2, IR3 and UV/IR2. These types come in Standard, ATEX/ExD and Intrinsically Safe versions (IR2 and IR3 only) and all requirements for installing remains generic for all...
18 Aug How to install a Fireray 5000
The Fireray® 5000 is a motorised reflective, auto aligning Optical Beam Smoke Detector designed from the ground up to include pioneering technology that fully addresses the needs of the installer and user, both now and in the future. The Fireray® 5000 is ideally suited for the...
16 Aug How to install a Fireray 3000/EXD
The Fireray® 3000 is an End-to-End manually aligned Beam, suited to applications where access to ceiling mounted smoke detectors presents practical difficulties. The Fireray® 3000 Exd is ideally suited for the protection of large areas, with potentially explosive atmospheres, against smoking fires....
09 Aug How to install a Fireray One
With no specialist tools needed for installation and operation, the Fireray® One is a standalone Optical Beam Smoke Detector that prioritises ease of installation and can be installed by just one person....
02 Aug Spark Detection Technology
The Talentum® Spark is a specialist detector designed for industrial applications to protect enclosed, dark areas where visible light is not present such as dryers or extraction ducts....
23 Jul IR2, IR3 and UV/IR2 Technology
Which Flame detector should you choose? Our Talentum range includes 3 types of detector with different types of housings for your environment. Each detector has been designed with specialised technology to detect sparks faster than any other detection however, it’s critical that you choose the...
21 Jul End-to-End Technology
Our End-to-End Optical Beams uses technology that only transmits and Infra-Red (IR) light beam in one direction into a Receiver. As a result, these Smoke Detectors can operate within narrower gaps left in the operating environment....
15 Jul Reflective Technology
Our reflective Optical Beams use reflective technology that transmits an Infra-Red (IR) light beam onto a Reflector (prism) reflected into an optical Receiver....
- 1
- 2